affected zone
英 [əˈfektɪd zəʊn]
美 [əˈfektɪd zoʊn]
网络 变质区域
双语例句
- The material is stored in a special radiation proof container.
这种原料被储存在防辐射的特殊容器里。 - Though flow cutoff has major influence on the riverside source fields in the lower Yellow River, yet it won't has great effect on groundwater resources in the affected zone of Yellow River.
断流对黄河下游傍河水源地开采动态水位影响较大，但宏观上对侧渗补给影响带地下水资源不会产生较大影响。 - Simulation of the microstructure evolution of welding-grain growth in heat affected zone
焊接过程组织演变&模拟焊接热影响区晶粒长大 - The concept of "weld bead heat affected zone"( WBHAZ) was proposed.
提出了“焊道热影响区”的概念。 - Study on Structure and Toughness in heat affected zone of Nb-Ti Microalloyed Steel after Welding with High Heat Input
Nb-Ti微合金钢大线能量焊接热影响区组织和韧性的研究 - Modeling of the heat affected zone in welding is a difficult problem in dynamic analysis, while the consistent of modal parameters is a major objective of modeling and model amendment.
焊接热影响区建模是动力学分析的一个难点问题，而模态参数的一致逼近是建模及修正的一个主要目标。 - Using the heat of welding to vapour water, cooling rates are lowered on the weld bead and heat-affected zone.
利用焊接时的加热使水汽化，不仅使焊道而且使热影响区的冷却速度减慢。 - The test results show that the flame cutting heat affected zone is wider than machining and lower in hardness.
结果表明，火焰切割试样焊接接头的焊接热影响区比机械加工试样焊接接头的焊接热影响区宽，硬度低； - Initially, semiconductor manufacturers had concerns over the visual appearance and the extent of the heat affected zone ( HAZ) of the die after laser dicing.
要实现好的切割质量，小的热影响区，需要使用低的激光功率。 - The Charpy impact test of base metal, weld and heat affected zone of X80 grade pipeline steel of certain factory was conducted, and its effective grain was researched.
对某厂X80高钢级管线钢母材、焊缝、热影响区进行了夏比冲击韧性试验，对其有效晶粒进行了研究。 - The influence of weld heating on microstructure of heat affected zone was investigated in this paper.
探讨了焊接加热对热影响区组织的影响。 - Based on the structure character of the joint, the microstructure of the joint can be divided into plasticity zone, dynamically quiescent layer, heat affected zone and base metal.
根据焊点接头的组织特征可将其分为塑性区、动态静止层、热影响区和母材。 - The properties in weld deposit metal and Heat Affected Zone are strictly homogeneous with the base metal.
在焊接性能和热影响区金属矿床严格均匀与金属基材。 - Effects of Electropulsing on the Microstructure, Mechanical Properties and Thermal Fatigue Behaviors of Die Steel Heat Affected Zone
脉冲电流对模具钢热影响区组织、力学性能和热疲劳行为的影响 - Any material passing through the affected zone is potentially vulnerable to degradation.
流过受影响区域的任何材料都可能易于降解。 - In frequent bending stress condition, fatigue cracking occurred due to the cracking source had been initiated in welding heat affected zone.
在承受频繁的弯曲应力作用后，在其焊接热影响区萌生了裂纹源进而发生疲劳开裂。 - Impact toughness in the welding heat affected zone of HSLA steel with boron
含硼低合金高强度钢焊接热影响区冲击韧度 - The results show that, after welding, microstructure of the weld zone and the heat affected zone are different from the parent metal, showing characteristics of weave structure.
结果表明，焊接后焊缝区和热影响区的组织与母材的组织差别很大，表现为魏氏组织特征； - Influence of elevated temperature holding time on microstructure and properties in heat affected zone of fine grained titanium alloy Large eutectic ledeburite is not found.
高温停留时间对细晶粒钛合金粗晶区组织的影响合金层中的碳化物细小、均匀、弥散，无粗大的共晶莱氏体组织。 - The transformation superplasticity in welding CGHAZ ( Coarse Grain Heat Affected Zone) of EH36MOD steel and its effect on fatigue life have been studied with thermal simulating method.
采用热模拟方法，对EH36MOD钢焊接热影响区粗晶区（CGHAZ）的相变超塑性及其对疲劳寿命的影响进行了研究。 - The comparison results show that mechanical vibration welding can decrease the residual stress in heat affected zone, refine crystal grain, and improve the fatigue life of the weldment.
结果表明，机械振动焊接可降低焊接残余应力、细化焊缝和热影响区的金相组织，提高焊件疲劳寿命。 - The teams will work together to install cutting edge instruments such as those that measure the speed at which the ground is moving and deforming in the affected zone.
这些研究组将合作在受影响的地区安装最先进的仪器&诸如测量地面运动和变形速度的仪器。 - The heat affected zone consists of grown grains.
热影响区的组织发生了粗化。 - The effects of different aid-gases and technological parameters on laser cutting of titanium alloy have been investigated. The characters of cut plane and heat affected zone of laser cutting have been analyzed.
研究了不同辅助气体和工艺参数对激光切割钛合金板的影响，分析了激光切割切缝的断面特征和热影响区特点。 - HAZ ( heat-affected zone) was also studied.
本文对热影响区也进行了研究。 - Intergranular corrosion of heat-affected zone was improved.
热影响区的晶间腐蚀倾向得到改善。 - Nitride precipitation is the primary type of nitrogen loss in the heated affected zone during welding process.
焊接加工时热影响区氮化物析出是固溶氮的一种主要损失方式。 - Lower impact toughness was found in welding heat affected zone of trial steel.
发现试验钢的焊接热影响区冲击韧性较低。 - Between the thermal mechanical affected zone and heat affected zone have a relatively clear interface in longitudinal section.
发现在纵截面上热机影响区和热影响区有一个较为明显的组织过渡界面，热影响区晶粒粗化。 - The rainfall of compared zone and affected zone are all reduced, but the area of the rainfall region expands.
地面降雨量作业后影响区以及对比区都减少了，但是降雨面积比原来扩大了。